Surface Preservation; Filling The Bucket - Terex TSV-70 Operation And Maintenance Manual

5.4 Surface Preservation

Care should be taken while oper-
ating on unpaved surfaces to pre-
vent blemishes from occurring.
Turning poses the greatest risk of
surface disturbance during opera-
tion. Moving in a straight line
across turf will typically cause less
disturbance, whereas tight corner-
ing will usually cause blemishes.
While working on turf, make gradual turns. (see item A) If space is limited, turn
gradually by moving back and forth until facing the desired direction. (see item B)

5.5 Filling The Bucket

Steps: (see illustration)
1. Lower the lift arms until they rest on the frame.
2. Tilt the bucket slowly forward until the cutting edge engages the ground.
3. Drive the machine forward until the bucket is full of material.
4. Curl the bucket and raise the lift arms simultaneously to break the load free
from the pile.
5. Maneuver the machine clear of the pile and then lower the lift arms, keeping
the bucket curled upward, to approximately 10-12 in. (25-30 cm) above the
ground for transporting.
5.4-1
A
51
5 OPERATION
B