Exchange Of Paint Channel - WAGNER GA 2000EAC Translation Of The Original Operating Manual

EDITION 12/ 2008
OPERATING MANUAL
8.5

EXCHANGE OF PAINT CHANNEL

Paint channel assembly
tool (353800)
If the round jet nozzle is fi tted
1. Unscrew nozzle nut (1).
2. Loosen nozzle body (2) with a universal spanner and unscrew, remove seal nipple.
3. Unscrew seal screw (3) with paint channel assembly tool.
4. Remove paint channel.
Assemble in reverse order, use screw (3) again.
If the fl at jet nozzle is fi tted
1. Unscrew cap ring (5).
2. Remove air cap (6) and Brillant AirCoat nozzle (7).
3. Unscrew seal screw (3) with paint channel assembly tool.
4. Pull off the paint channel (4) with the round screw hook out of the gun attachment.
Assemble in reverse order, use screw (3) again.
Note
Clean attachment and paint channel separately. Otherwise they can stick together.
Insert the paint channel as shown below (note position of the shoulder for the seal
screw).
PART NO. 350741
Universal spanner
Round jet
Brillant fl at jet
GA 2000EAC, GA 2005EAC
39