EDITION 12/ 2008
OPERATING MANUAL
5
PREPARATION BEFORE STARTING WORK
5.1
SET UP AND CONNECT
5.1.1
TYPICAL ELECTROSTATIC SPRAYING SYSTEM
Incorrect installation/operation!
Risk of injury and damage to equipment
SIHI_0050_GB
A
Spraying booth
B
Object
C
Conveyor
D
Control cabinet
E
Movement device system
F
Electrostatic automatic air spray gun
PART NO. 350741
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the addi-
tionally required system components.
WARNING
The
spray
gun
GA
GA 2005EAC must be used a part of an
AirCoat electrostatic spraying system.
The spraying system shown in the fi gure
is only one example of an electrostatic
AirCoat spraying system. It is not an ac-
tual system design.
Contact your WAGNER distributor for as-
sistance in designing a system to meet
your needs.
The operating instructions and the safe-
ty regulations for the additional system
components used must be read before
starting-up.
GA 2000EAC, GA 2005EAC
2000EAC
or
21