Tektronix Keithley DMM7510 User Manual page 48

Section 5: Measuring DC voltage with high accuracy
Make sure power to the instrument is off and make the following connections:
•
Connect the test leads to the INPUT HI and LO terminals.
•
Connect the INPUT HI connection to one of the DUT leads.
•
Connect the INPUT LO connection to the other DUT lead.
The physical connections for the front and rear panels are shown in the following figures.
Figure 25: Front-panel connections for high-accuracy DC voltage measurements
Figure 26: Rear-panel connections for high-accuracy DC voltage measurements
5-2
Model DMM7510 7½ Digit Multimeter User's Manual
DMM7510-900-01 Rev. C / September 2019