Making Basic Front-Panel Measurements; Introduction; Equipment Required For This Example - Tektronix Keithley DMM7510 User Manual

In this section:

Introduction .............................................................................. 4-1

Equipment required for this example ........................................ 4-1

Device connections .................................................................. 4-2
Basic front-panel measurements .............................................. 4-2
View measurement data .......................................................... 4-3
Introduction
This example application makes a 2-wire resistance measurement using the front panel of the
instrument.
Set the function before making other instrument settings. Many of the settings are related to a
specific measure function. The applications in this manual use the order of operations to produce the
best results.
Equipment required for this example
Equipment required to perform this test:
•
One DMM7510
•
Two insulated banana cables (you can use the Model 1756 General Purpose Test Lead Kit that is
provided with the DMM7510)
•
One resistor to test; the example uses a resistor with a 9.53 kΩ rating

Making basic front-panel measurements

Section 4