Tektronix Keithley DMM7510 User Manual page 46

Section 4: Making basic front-panel measurements
If you select a data point, additional detail about that data point is displayed, including the function,
math, and limits.
To jump to a specific spot in the data, select the menu in the upper left and select Jump to Index.
The selected data point is displayed at the top of the reading table.
To save the data, select the menu in the upper left and select Save to USB.
Using the front panel to view the contents of a reading buffer:
1. Press the MENU key.
2. Under Views, select Reading Table. Data for the active reading buffer is displayed.
3. To display data for a different reading buffer, select the new buffer.
4. To view details for a specific data point, swipe the table up or down and select the data point to
view the Reading Details. If there are many data points, select an area on the reading preview
graph in the upper right corner of the screen to get closer to the data you want, and then scroll to
the data point. You can also select the menu and select Jump to Index to go to a specific point.
5. Press the HOME key to return to the home screen.
4-4
Model DMM7510 7½ Digit Multimeter User's Manual
Figure 24: Reading table
DMM7510-900-01 Rev. C / September 2019