Web Interface Home Page - Tektronix Keithley DMM7510 User Manual

Section 3: Using a remote interface
To restart the instrument:
1. Turn the power to the instrument off, and then on.
2. Wait at least 60 seconds for the network configuration to be completed.
To set up LAN communications:
1. Press the MENU key.
2. Under System, select Communication.
3. Select the LAN tab.
4. Verify the settings.
If the above actions do not correct the problem, contact your system administrator.

Web interface Home page

The Home page of the instrument provides information about the instrument. It includes:
•
The instrument model number, manufacturer, serial number, and firmware revision number.
•
The TCP Raw Socket number and Telnet Port number.
•
The last LXI message. The history link opens the LXI Home page.
•
The ID button, which allows you to identify the instrument. Refer to
page 3-15).
3-14
Figure 21: DMM7510 web interface Home page
Model DMM7510 7½ Digit Multimeter User's Manual
Identify the instrument
DMM7510-900-01 Rev. C / September 2019
(on