Statistics Swipe Screen; Secondary Swipe Screen - Tektronix Keithley DMM7510 User Manual

Section 2: Front-panel overview

STATISTICS swipe screen

The STATISTICS swipe screen contains information about the readings in the active reading buffer.
When the reading buffer is configured to fill continuously and overwrite old data with new data, the
buffer statistics include the data that was overwritten. To get statistics that do not include data that
has been overwritten, define a large buffer size that will accommodate the number of readings you
will make. You can use the Clear Active Buffer button on this screen to clear the data from the active
reading buffer.

SECONDARY swipe screen

The SECONDARY swipe screen allows you to display the results of two measurements on the
front-panel display.
To start displaying secondary measurements, select the Second Function and select Secondary
Measure. Secondary measurements are only available in Continuous Measurement Mode and
Manual Trigger Mode. This feature is only available from the front panel of the instrument.
Refer to "Display results of two measure functions" in the Model DMM7510 Reference Manual.
2-10
Model DMM7510 7½ Digit Multimeter User's Manual
Figure 8: STATISTICS swipe screen
DMM7510-900-01 Rev. C / September 2019