AJAX CombiProtect User Manual page 7

Motion Detector
Motion Detector Sensitivity
Motion Detector Always active
Glass Break Detector
Glass Protection Sensitivity
Glass Protection Always Active
Alert with a siren if motion detected
Alert with a siren if glass break detected
Jeweller Signal Strength Test
Detection Zone Test
Attenuation Test
Temporary Deactivation
If active, motion detector will be active
Choosing the sensitivity level of the motion
detector:
High
Normal
Low
If active, the detector always registers motion
If active, glass breaking detector will be active
Choosing the sensitivity level of the glass
detector:
High
Normal
Low
If active, the detector always registers glass
breaking
HomeSiren
If active, and
activated when the motion detected
If active, HomeSiren and StreetSiren are
activated when the glass break detected
Switches the detector to the signal strength test
mode
Switches the detector to the detection area test
Switches the detector to the signal fade test
mode (available in detectors with rmware
version 3.50 and later)
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
Deactivate entirely — the device will not
execute system commands or participate in
automation scenarios, and the system will
ignore device alarms and other noti cations
StreetSiren
are