Table of Contents
Advertisement
Set Passwords
Click Set in the Passwords panel (see figure 81,
Figure 81.
The fields in the Passwords dialog box are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to 12 upper case and lower case
alphanumeric characters. Each password must be entered twice: once in the Password
field (
masked by asterisks or dots (*****). If you do not want to password protect an access level,
leave both fields blank. After entering the desired password in both fields, click the Apply
button (
NOTES:
Set the Clock
Sync to PC
The simplest way to set the switcher clock is to click Sync to PC in the Date/Time
Settings panel (see figure 82). The switcher uploads the time and date information from
the connected computer.
Figure 82.
1 1 1 1
1 1
1 1 1 1
1 1 1 1
1 1 1 1
Passwords Dialog Box
) and then again in the Confirm Password field (
2
).
4
•
The factory configured passwords for all accounts on this device have been set
to the device serial number. Passwords are case sensitive. If the device is reset,
the password will be the original password configuration.
An Administrator password must be created before a user password can be
•
created.
•
You cannot clear an existing password using this dialog box (see the
(clear) administrator password
commands, both on page 68).
Date/Time Settings Panel — Sync to PC
DTP CrossPoint 84 Series Matrix Switchers • HTML Operation
) to open the Passwords dialog box.
1
2 2
2 2 2 2
2 2 2 2
2 2 2 2
2 2 2 2
3 3 3 3
3 3 3 3
3 3 3 3
3 3 3 3
3 3
2 2 2 2
2 2 2 2
2 2 2 2
2 2 2 2
2 2
3 3 3 3
3 3 3 3
3 3 3 3
3 3 3 3
3 3
). Characters in these fields are
3
and
Reset (clear) user password
4 4 4 4
4 4 4 4
4 4 4 4
4 4 4 4
4 4
Reset
SIS
136
Advertisement
Table of Contents
