Table of Contents
Advertisement
Esc (
>
F
function () and five secondary functions (•):
Cancels operations or selections in progress and resets the front panel button
indicators and blinks once to indicate that the escape function has been activated.
With the View button, indicates Input Audio Configuration mode.
•
•
With the Enter, Preset, and View buttons, selects Serial Port Configuration mode.
•
Selects 115200 baud for the rear panel Remote port in Serial Port Configuration
mode and indicates the selection.
•
With the Preset Preset and View button, selects between front panel locks
(Lock mode 2 and Lock mode 0).
•
With the View button, selects between front panel locks (Lock mode 2 and
Lock mode 1).
I/O Buttons
NOTE: See
the following operations.
Primary functions
Secondary functions
Control insert
configuration
Resets
Video button — The Video button has one primary function () and two secondary
G
functions (•):
Selects and deselects video for a configuration that is being created or viewed and
lights green to indicate that video is available for configuring or for viewing.
With the Audio button, indicates Control Insert Configuration mode.
•
•
With the Audio button, commands the front panel system reset.
Audio button — The Audio button has one primary function () and two secondary
H
functions (•):
Selects and deselects audio for a configuration that is being created or viewed and
lights to indicate that audio is available for configuration or viewing.
•
With the Video button, indicates Control Insert Configuration mode.
•
With the Video button, commands the front panel system reset.
) button (see
figure 17
on page 22) — The Esc (
Front Panel Operations
Action
Select video
Indication
Green: selected
Indication
Blink: Control Insert Configuration Mode.
Action:
DTP CrossPoint 84 Series Matrix Switchers • Operation
>
) button has one primary
starting on page 28 for detailed descriptions of
Select audio
Red: selected
VIDEO
AUDIO
Perform a system reset.
26
Advertisement
Table of Contents
