Set Passwords - Extron electronics DTP CrossPoint 4K Series User Manual

Set Passwords

Click
Figure 87.
The fields in the
passwords. Passwords are case-sensitive and are limited to 12 upper case and lower case
alphanumeric characters. Each password must be entered twice: once in the
field (
masked by asterisks or dots (*****). If you do not want to password protect an access level,
leave both fields blank. After entering the desired password in both fields, click the
button (
NOTES:
in the panel (see figure 87,
Set Passwords
1 1 1 1 1 1 1 1 1 1
Passwords Dialog Box
dialog box are for entering and verifying administrator and user
Passwords
) and then again in the
2
Confirm Password
).
4
• An administrator password must be created before a user password can be
created.
•
You cannot clear an existing password using this dialog box (see the
administrator password
both on page 83).
DTP CrossPoint 4K Series Matrix Switchers • HTML Pages
) to open the
1
field ( ). Characters in these fields are
3
and Reset (clear) user password
dialog box.
Passwords
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
Password
Apply
Reset (clear)
SIS commands,
158