Switching Off; Programming - Harvia sentiotec wave.com4 Instructions For Installation And Use Manual

Instructions for use for the user

4.11. Switching off

By pressing the key
Point 4.4 of these operating instructions).
Change to the OFF menu point with the keys
Auswahl mit der Taste
If you have executed climate operation/humidity operation before switching off
the Wave.com4 sauna control unit, the control unit will start the airing programme
after the aforementioned action (see Point „Airing programme/ humidity rec-
tification". of these operating instructions). Dry now appears on the operating
unit (airing programme is executed). When the airing programme ends (run time:
2x 15 minutes) the Wave.com4 sauna control unit switches off automatically.
The cabin light and heating device are now deactivated and the symbol
illuminates..
TIP!
To stop the airing programme hold the keys

5. Programming

1. Automatic switch-on
Activate the main switch which disconnects the Wave.com4 sauna control unit
from the mains after use at all poles. The symbol
nates. The automatic switch-on can be programmed by simultaneously pressing
(3 secs.) the and
6
und keys. Change to the operating mode setting menu with the
5 6
Confirm your selection with the key
TIP!
The automatic switch-on mechanism is deactivated in the event of power
failure or manual switch-on.
, you reach the operating mode selection menu (see
4
.
4
keys. Now set a time interval in hours (1 to 24) with the
4
4
and . Bestätigen Sie Ihre
5 6
and
4
on the operating unit illumi-
8
.
p. 23/42
8
.
5
key.
7
EN