Final Mounting (Components And Cables) - Harvia sentiotec wave.com4 Instructions For Installation And Use Manual

Installation instructions, only for experts
CAUTION!
The cabin wall may only be drilled as far as the insulation material.
CAUTION!
The RJ10 4/4 may only run to the power unit between the external and
internal wood panelling.
CAUTION!
Never remove the plastic protective cover on the reverse of the operating
unit!
CAUTION!
The Wave.com4 operating unit is appropriate for installation inside or
outside of the cabin (it must conform to the ambient parameters in ac-
cordance with the technical data in these operating instructions)!
TIP!
Affix the operating unit yourself to the cabin wall with the supplied screws.

3.6. Final mounting (components and cables)

When all cables are installed, fix the components together, strictly observing
these operating instructions (observe the connection schedule in these operating
instructions).
CAUTION!
Before you connect further modules to the Wave.com4 sauna control
unit, first check whether the power unit and the pertaining cables are
completely installed.
p. 15/42
EN