Table of Contents
Advertisement
1.11 Configuration menu (cont.)
Display
Steps
Memory of
maximum
Memory of
minimum
Key UP
Tools
('Fast access')
Setpoint 1
Setpoint 2
Memory of
maximum
Memory of
minimum
FEMA ELECTRÓNICA . Series S . S40-T
1.11.4 Display filters
The instrument provides several functions associated to the reading
of the display values
• the 'Steps' ('StEP') function allows to define minimum reading
steps, which will be done in steps of 1, 2, 5, 10, 20 or 50 counts.
Example - selecting a step of 20 configures the reading to change in
steps of 20 counts ('1420', '1440', '1460', ...).
• the 'Memory of maximum' ('MAX') function displays the maximum
reading value stored in memory. It also provides a way to reset the
value. This parameter is eligible for configuration through the 'Fast
access' menu (see section 1.11.5).
• the 'Memory of minimum' ('MAX') function displays the minimum
reading value stored in memory. It also provides a way to reset the
value. This parameter is eligible for configuration through the 'Fast
access' menu (see section 1.11.5).
1.11.5 Fast access
The 'UP' (5) key at the front of the instrument gives access to a list
of functions configurable by the operator. See section 1.10 for an ex-
planation on how to operate the 'fast access' menu.
The 'Key UP (Fast access)' ('K.uP') menu allows to select which func-
tions will be accessible through the 'fast access' menu. Select 'on' to
activate each function.
• the 'Setpoint
1' ('ALr1') function allows to visualize and modify the
alarm
1 setpoint through the 'fast access' menu.
• the 'Setpoint
2' ('ALr2') function allows to visualize and modify the
alarm
2 setpoint through the 'fast access' menu.
• the 'Memory of maximum' ('MAX') or 'Memory of minimum'
('MIn') functions allow to visualize the maximum or minimum read-
ing value stored in memory. To reset this value, visualize the memory
value at the 'fast access' menu with key UP (5) and when message
'rSt' is displayed, press (<) to reset.
1.11.6 Super fast access
If only a single function is selected for the 'fast access' menu, press-
ing the the 'UP' (5) key will shortly display the function name and
then automatically jump to the function value.
9
Advertisement
Table of Contents
