TOHATSU BFT 200D Owner's Manual page 119

Hide thumbs Also See for BFT 200D:
Table of Contents

Advertisement

ENGINE WILL NOT START
Possible Cause
Battery connections loose or corroded.
Battery discharged.
Fuse(s) blown.
Spark plugs faulty, fouled, or improperly gapped.
Spark plugs wet with fuel (flooded engine).
Fuel system malfunction, fuel pump failure, ignition
malfunction, stuck valves, starter malfunction, switch
malfunction, or electrical problem in the starting circuit,
etc.
TAKING CARE OF UNEXPECTED PROBLEMS
Clean and tighten battery connections.
Recharge battery.
Replace fuse(s) (p. 120).
Gap or replace spark plugs (p. 95).
Dry and reinstall spark plugs. Start engine with the throttle
open.
Use starting procedure (p. 56, 59, 62, 64); if engine still
will not start, then take outboard motor to an authorized
TOHATSU dealer, or refer to the service manual.
Correction
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 225dBft 250d

Table of Contents