Table of Contents
Advertisement
PTT Switch Panel
DUAL TYPE
Press UP to
raise bow
Press DN to
lower bow.
POWER TRIM/TILT SWITCH
TRIPLE TYPE
Press UP to
raise bow
Press DN to
lower bow.
POWER TRIM/TILT SWITCH
For multiple outboard motors, the
trim/tilt angle of all outboard motors
is adjusted at the same time by using
the power trim/tilt switch on the
remote control lever and the trim/tilt
angle of each outboard motor is
adjusted by using each power trim/tilt
switch on the panel.
OUTBOARD
OUTBOARD
MOTOR
MOTOR
TRIMMED TOO
TRIMMED TOO
HIGH
LOW
OUTBOARD MOTOR
TRIMMED CORRECTLY
BOW TOO LOW DUE TO
1. LOAD IN THE FRONT
2. OUTBOARD MOTOR TRIMMED
TOO LOW
BOW TOO HIGH DUE TO
1. LOAD IN THE REAR
2. OUTBOARD MOTOR TRIMMED
TOO HIGH
OPERATION
If steering effort is not equal in both
directions, adjust the trim tab to
compensate for ''torque steer,''
which is the reaction of the outboard
motor to propeller rotation.
TRIM TAB BOLT
TRIM TAB
Adjust the trim tab with the engine
stopped. Loosen the bolt above the
trim tab, turn the trim tab, and then
tighten the bolt securely.
When the trim tab is correctly
adjusted, steering effort will be equal
in both directions.
Refer to TRIM TAB ADJUSTMENT
on p. 87.
77
Advertisement
Table of Contents
