Table of Contents
Advertisement
4. With the outboard motor turned to
the starboard side, tilt the outboard
motor up. Keep the end of the drain
hose below the level of the vapor
separator drain screw, and watch
for the fuel to start flowing out the
drain hose.
5. After the fuel starts flowing out the
drain hose, tilt the outboard motor
down and allow the vapor separator
to finish draining.
6. After draining thoroughly, tighten
the drain screw securely.
7. Clip the drain hose on the head
cover.
8. Drain the fuel tank into an
approved gasoline container.
Engine Oil
1. Change the engine oil and the oil
filter (p. 91 – 93).
2. Remove the spark plugs (p. 95),
and remove the emergency stop
switch clip from the emergency
stop switch.
3. Pour 1 – 2 teaspoons (5 – 10 cm
of clean engine oil into each
cylinder.
4. Rotate the engine a few revolutions
to distribute the oil in the cylinders.
5. Reinstall the spark plugs (p. 97).
3
)
STORAGE
111
Advertisement
Table of Contents
