Station Select Mode; Stopping The Engine; Emergency Engine Stopping - TOHATSU BFT 200D Owner's Manual

During the warm-up period, check
the oil pressure indicator (p. 48),
overheat indicator (p. 49), and
cooling system indicator (p. 49).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS on
p. 115.
6. If the fast idle control was used to
warm-up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.

Station Select Mode

ACT INDICATOR
[-] SWITCH
PRESS and HOLD
For multiple station type, use the [-]
switch to change the operating
station.
If you press and hold the [-] switch of
the inactive station when all remote
control lever is in the NEUTRAL
position, you can operate the
outboard motors using this station.
A long buzz sounds once and the
ACT indicator comes on when the
station can be operated.
OPERATION

STOPPING THE ENGINE

Emergency Engine Stopping

Flush-Mount Type, Top-Mount
Type (DBW type)
EMERGENCY EMERGENCY
STOP SWITCH
STOP SWITCH
CLIP LANYARD
67