Function Switches; (Flush-Mount Type) - TOHATSU BFT 200D Owner's Manual

Function Switches

(Flush-Mount type)

[+] SWITCH
[-] SWITCH
Function switches are used for
operations in the fast idle mode and
trolling mode.
NT (WARM)
Lights: The shift is in neutral.
Blinks: It is in the fast idle mode.
ACT
Lights: The shift and throttle
operations are possible.
Off: The shift and throttle operations
are not possible.
<Fast Idle Mode>
After the engine starts and if the
outside temperature is below 41°F
(5°C), the fast idle mode can be used
to accelerate engine warm up.
See page 57 for engine warm-up
instructions.
CONTROLS AND FEATURES
NEUTRAL
FORWARD
Pull up
GEARSHIFT/
THROTTLE
CONTROL
LEVER
Use the [-] switch and the gearshift/
throttle control lever to adjust the
engine speed without gearshift when
warming up the engine.
Keeping the [-] switch pressed when
the gearshift/throttle control lever is
in the NEUTRAL position, turn the
lever forward. Keep turning the lever
forward. The throttle opens and the
engine speed increases after the lever
passed the shift point.
Note that the gearshift mechanism
does not function when the [-] switch
is pushed once and then released after
the gearshift/throttle control lever is
moved.
The control lever does not operate unless
the neutral release lever is pulled.
REVERSE
NEUTRAL
RELEASE
LEVER
27