Specifications - TOHATSU BFT 200D Owner's Manual

Hide thumbs Also See for BFT 200D:
Table of Contents

Advertisement

TECHNICAL INFORMATION

Specifications

MODEL
Description code
Type
LRA
Overall length
Overall width
Overall height
70.4 in
(1,789 mm)
Transom height
(when transom angle
20.0 in (508 mm)
at 12°)
Dry mass [weight]*
615 lbs (279 kg) 626 lbs (284 kg) 628 lbs (285 kg)
Rated power
Full throttle range
Engine type
Displacement
Spark plug gap
Steering control system
Outboard motor-mounted, remote control
Starter system
Ignition system
Lubrication system
* Without battery cable, with propeller
This TOHATSU motor is power rated in accordance with NMMA procedures and using the ICOMIA standard 28/23.
136
BFT200D
BBRJ
XRA
37.3 in (948 mm)
26.0 in (660 mm)
75.4 in
(1,916 mm)
25.0 in (635 mm)
149.1 kW (200 HP)
5,000 – 6,000 rpm
4 stroke OHC 6-cylinder (V6)
3
218.6 cu-in (3,583 cm
)
0.039 – 0.043 in (1.0 – 1.1 mm)
Electric starter
Full transistor battery
Trochoid pump pressure lubrication
Specified oil
XCRA
Oil capacity
CARB star label
D.C. output
Cooling system
Exhaust system
Spark plugs
Fuel pump
Fuel
Gear change
Steering angle
Tilt up angle
Trim angle
Engine: API standard (SG, SH, SJ or SL oil)
SAE/FC-W 10W-30
Gear case: API standard (GL-4) SAE 90
Hypoid gear oil
Engine: 8.0 US qt (7.6 L)
without oil filter change
8.2 US qt (7.8 L)
with oil filter change
Gear case: 1.55 US qt (1.47 L)
ULTRA · LOW EMISSION
12 V – 60 A
Water cooling with thermostat
Underwater exhaust
ZFR6K-11E (NGK)
IZFR6K-11E (NGK)
Electromagnetic type
Unleaded gasoline
(86 pump octane or higher)
Dog type (Forward-Neutral-Reverse)
30° right and left
68° (when Transom angle is 12°)
– 4° to 16° (when Transom angle is 12°)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 225dBft 250d

Table of Contents