Table of Contents
Advertisement
8.4
Remote Control via LAN
With the SNMP Agent option you also have the possibility to control and mo-
nitor the system via the network by using the ETI Decoder Software.
Remark
Please note that local control is always given priority over control via network.
As soon as the ETI Decoder Software is started locally at Port 2 of the SNMP
i
Agent, remote control via TCP/IP is automatically interrupted.
To activate the TCP/IP interface please open the dialog for the administration
of the control interfaces via the menu Configuration → COM Port.
Please press the Switch to TCP/IP Control Interface button to activate
the control interface via TCP/IP.
FIG. 37
In the following dialog, you enter the Port (Default stetting: 10000) and the IP
Address (see FIG. 30), under which the SNMP Agent is accessible.
FIG. 38
COM PORT CONFIGURATION FOR TCP/IP ACCESS
TCP/IP PARAMETER
O p t i o n :
S N M P
A g e n t
PA G E 5 3
Advertisement
Table of Contents
