Table of Contents
Advertisement
5.2
Configuration of the headroom of the analogue output
The jumpers for the configuration of the headroom are located as shown in
FIG. 7. Before changing the settings please make sure, that the power supply
cable is disconnected. The figure below shows the setting of the jumpers. The
following settings can be selected:
– 6 dB Headroom and
– 10 dB Headroom.
Important
The jumpers for the left and right channels must be configured in the same
way.
!
The factory setting is 6 dB headroom since the MAGIC Encoder systems are
also configured with 6 dB headroom.
FIG. 7
CONFIGURATION OF THE HEADROOM OF THE ANALOGUE OUTPUT
6 dB
10 dB
PAG E 2 0
Advertisement
Table of Contents
