Table Of Contents - AVT MAGIC DAB Hardware/Software Description

C o n t e n t
1 SAFETY 9
1.1 Introduction 9
1.2 General safety requirements 9
1.3 Appearance of the safety instructions 10
1.3.1 Classification of safety instructions 10
1.3.2 Symbols 10
2 INTRODUCTION 12
3 MECHANICAL DESIGN 13
4 SYSTEM DESCRIPTION 15
4.1 The circuit „Interface Unit" 16
4.2 The ISO/MPEG Decoder 18
5 CONFIGURATION OF THE SYSTEM 19
5.1 Configuration of the 2 Mbit/s (E1) Interface 19
5.2 Configuration of the headroom of the analogue output 20
5.3 Configuration of the AES/EBU Module 21
6 PUTTING THE MAGIC ETI DECODER INTO OPERATION 23
6.1 Mounting 23
6.2 Connection to the mains voltage 23
6.3 Signalling LEDs 24
6.4 Operating Keys on the front panel 24
6.5 Replacing the fuse 24
6.6 Connection of the ETI Decoder in the DAB network 25
6.7 Connection of the Systems 26
7 WINDOWS PC SOFTWARE ETI DECODER 27
7.1 Hardware requirements 27
7.2 Installation of the Windows PC Software 27
7.3 Elements of the graphical user interface 29
7.4 Menu File 29
7.4.1 Submenu Exit 29
7.5 Menu Configuration - Basic configuration of the system 29
7.5.1 Submenu Com Port 30
7.5.2 Submenu System Configuration 30
7.5.3 Submenu Administration Password 33
7.6 Menu Administration 35
7.6.1 Submenu System Panel 35