Configuration Of The Snmp Agent - AVT MAGIC DAB Hardware/Software Description

O p t i o n : S N M P A g e n t
The data is stored on the SNMP Agent. It can now be reached under the en-
tered IP address in the network. All further settings are configured in the ETI
Decoder Software.
Remark With the SNMP AGENT Admin Software, a firmware update of the
RS232/LAN converter is also possible: Via the menu Upgrade → Applica-
i
tion you can load an application firmware (file name: Snmp4Eti.ap in the
directory <installation path>\AVT SNMP Agent). The menu Up-
grade → Kernel allows an update of the system software.
To protect your system from unauthorised access, it is necessary to configure
→
a password after the start-up under Configuration System or in the ETI
Decoder Software.
ATTENTION: If you forget your password, the SNMP Agent needs to be sent
in to unlock it.
8.2

Configuration of the SNMP Agent

Please start now the ETI Decoder Software.
The default setting is a connection via a COM Port of the PC. With Configu-
→
ration Com Port the configuration dialog for the COM Port is displayed.
FIG. 31 COM PORT CONFIGURATION FOR TCP/IP ACCESS
Please select the COM Port of your PC to which the SNMP Agent Port 2 is
connected and also the desired baud rate (default setting: 19200 Baud).
In the status line of the ETI Decoder Software the message PC Connected
is displayed.
The SNMP settings can now be configured under Configuration → Sy-
stem → SNMP.
PA G E 4 7