Table of Contents
Advertisement
7.5.2.5
Configuration of the Protocol Settings
FIG. 18
The ETI Decoder allows internal storage of up to 7000 alarms. The following
settings are available:
– Off switches the protocol function off
– Cyclic stores all messages in a ring buffer
– Standard stores all messages without a ring buffer and stops if buffer is full
The check box Include local MPEG-Decoder Alarms in Protocol enables
storage of local Decoder alarms in the protocol list.
With Set Time of ETI Decoder you can set the Decoder time to the PC time.
If the time is available in the ETI stream the sytem will decode the time infor-
mation automatically.
7.5.2.6
SNMP
The SNMP settings are only displayed, if the SNMP Agent option is available
(see CHAPTER 8).
7.5.3
Submenu Administration Password
To protect the system configuration from unauthorised acccess, you can as-
sign a password via Administration Password. The password is stored on
the PC.
Please enter the password under Enter new Password. Confirm your entry
in the Confirm Password line.
Now, the configuration can only be changed after the password has been en-
tered.
FIG. 19
W i n d o w s
P C
S o f t w a r e
CONFIGURATION OF THE PROTOCOL SETTINGS
ENTRY OF THE ADMINISTRATOR PASSWORD
E T I
D e c o d e r
PA G E 3 3
Advertisement
Table of Contents
