Snmp Parameter - AVT MAGIC AD1 ETI Hardware Manual

W i n d o w s P C S o f t w a r e
P A G E 4 6
4.7.2.2.4

SNMP Parameter

To integrate the MAGIC AD1 ETI Decoder into a network management sys-
tem, the SNMP function can be used. Currently, the system supports SNMP
V2.
FIG. 22
Under SNMP Parameter the function can be activated by enabling the option
SNMP.
Please ask your network management system administrator for the correct
SNMP settings.
– The Read Community entry is an identifier to read data. The name has to
be identical with the name in your Management System. By default, the
name public is used.
– Under Trap Community you define the name for the trap datagrams. The
name has to be identical with the name in your Management System.
– Please enter the port on which MAGIC AD1 ETI receives messages under
SNMP Port. The default setting is usually Port 161.
– The MAGIC AD1 ETI Decoder allows the addressing of up to three differ-
ent Network Management Systems. Please enter the corresponding IP ad-
dresses and Ports under NMS 1 (IP Adr./Port), NMS 2 (IP Adr./Port) and
NMS 3 (IP Adr./Port).
– Under System Description you can assign a name for the MAGIC AD1
ETI Decoder.
– Under Contact an email address can be entered.
– Under Location you can enter the location of the decoder.
– If a trap is to be sent when wrong community names are used, please ena-
ble the option Send authentication failure traps.
SNMP PARAMETER