Running The Tutorials - Agilent Technologies Cary 60 User Manual

Installation
2 Double-click the 'Validate' application.
The Agilent Software Registration dialog box appears.
3 Click Next and follow the instructions.
NOTE The product key is found on the UFD case.
4 Click Add next to the 'Instrument Model' section of 'Product Details' dialog box.
5 Choose Cary from the 'Instrument Type' drop-down box.
6 Select the Model Name.
7 Enter the Cary 60 serial number. See Figure 2.
8 In the Accessories section, repeat Steps 4-7 for all accessories ordered.
9 Click Next and follow the instructions to finish registration.
10 Click Start when the Validate application appears.
NOTE The validation process takes approximately 7 minutes to complete.
11 Once validation is finished, print the generated report and then close the
Validate application.

Running the Tutorials

To run the Cary 60 tutorials, double-click the tutorial icon on your computer
desktop.
The following tutorials are provided to get you started using the Cary WinUV
software:
Cary WinUV overview – describes the software layout, how to specify report
•
settings and how to save and open methods.
Measuring a sample at one or more wavelengths – describes how to perform
•
absorbance readings of samples using the Simple Read application.
Measuring multiple samples using the Multicell Holder accessory – describes
•
how to measure multiple samples using the Advanced Reads application.
Running a wavelength scan – describes how to scan multiple samples using
•
the Scan application.
Agilent Cary 60 Spectrophotometer User's Guide 23