Table of Contents
Advertisement
Running the Software Confidence Test
This measurement tests the Agilent phase noise test set's low- noise
amplifier circuitry. The phase detectors are not tested. This measurement
also confirms that the PC and test set are communicating with each other.
1
2
3
E5500_open_win_conf
04 Apr 04 rev 1
Figure 16 Opening the parameters definition file
The appropriate measurement definition parameters for this example have
been pre- stored in the Confidence.pnm file.
parameter data that has been entered for the phase noise test set
Confidence Test example.
E5505A Installation Guide
From the File menu, choose Open.
Choose the drive or directory where the file you want is stored.
In the File Name box, open Confidence.pnm. See
Measurement Software
Figure
16.
Table 11
on page 40 lists the
4
39
Advertisement
Table of Contents
