Maintenance And Spare Parts; Maintenance Spare Parts - Agilent Technologies Cary 60 User Manual

Maintenance and Spare Parts

6 Maintenance and Spare Parts
Maintenance
Spare Parts
Maintenance
Any procedures not specifically mentioned in this chapter or in the Cary WinUV
Help should be carried out only by Agilent field service engineers.
WARNING Eye Hazard
This instrument contains an intense light source. Direct viewing of the light
source will cause eye damage. Operators and other unauthorized personnel
must NEVER remove the main cover.
NOTE
This section refers only to maintenance procedures for the instrument. You should
refer to your PC and printer manuals for their maintenance procedures, and to the
Cary WinUV Help for the maintenance procedures for any accessories you ordered.
Any spills in the sample compartment should be wiped up immediately.
The exterior surfaces of the Cary 60 spectrophotometer should be kept clean. All
cleaning should be done with a soft cloth. If necessary, this cloth can be
dampened with water or a mild detergent. Do not use organic solvents or abrasive
cleaning agents.
For additional maintenance procedures, please see the Help provided with the
Cary WinUV software.
Spare Parts
The following spare parts are available for use with your Cary 60
spectrophotometer. Always use Agilent-supplied spare parts, unless otherwise
indicated.
Agilent Cary 60 Spectrophotometer User's Guide
35
35
35