Ce Compliance - Agilent Technologies Cary 60 User Manual

General Information
The following symbols appear on the instrument for your information:

CE Compliance

Your Agilent Cary 60 spectrophotometer has been designed to comply with the
requirements of the Electromagnetic Compatibility (EMC) Directive and the Low
Voltage (electrical safety) Directive (commonly referred to as the LVD) of the
European Union. Agilent has confirmed that each product complies with the
relevant Directives by testing a prototype against the prescribed EN (European
Norm) standards.
Proof that a product complies with these directives is indicated by:
the CE Marking appearing on the rear of the product, and
•
the documentation package that accompanies the product containing a copy
•
of the Declaration of Conformity. The Declaration of Conformity is the legal
declaration by Agilent that the product complies with the directives listed
above and shows the EN standards to which the product was tested to
demonstrate compliance.
Agilent Cary 60 Spectrophotometer User's Guide
Indicates high voltage Xenon flash lamp operating under this
cover. To avoid eye damage NEVER look at the light either
directly or via a reflecting surface. ONLY Agilent trained and
authorized personnel may remove this cover.
Indique qu'une lampe Xénon flash haute tension fonctionne
sous ce couvercle. Pour éviter toutes lésions oculaires NE
JAMAIS regarder la lumière que ce soit directement ou par
l'intermédiaire d'une surface réfléchissante. SEUL le personnel
Agilent formé et autorisé peut retirer ce capot.
Indicates viewing hole to check the operation of the Xenon
flash lamp.
11