Installing the Hardware
To install the Cary 60 hardware:
1
Plug in the USB cable.
Figure 1. Hardware connections
2
Connect the power supply to the power cable and then plug in to the Cary 60
and wall power outlet. See Figure 1.
3
Turn on the computer (if it is not already on).
4
Turn on the Cary 60 (Figure 2) and wait 2 minutes for calibration to complete.
Power button
Figure 2. Power button and serial number location
5
Remove the UFD.
6
Shut down and restart the computer.
Registering and Validating Your Cary 60
To register and validate your Cary 60:
1
Double-click the Cary WinUV icon on your computer desktop.
22
USB
Power
Serial
number
Agilent Cary 60 Spectrophotometer User's Guide
Installation