Connections; Using The Software - Agilent Technologies Cary 60 User Manual

Connections

Figure 6. Back and sample compartment connectors
Where:
1. 8-pin Mini Din socket at the back of the instrument for accessories.
2. USB Type B connector at the back of the instrument for connection to the computer.
3. 5.5/2.5 mm power jack at the back of the instrument for the 12 V power supply.
4. 8-pin DIN connector in the left side of the sample compartment for the diode detector.
5. 3.5 mm phono jack socket in the left side of the sample compartment for accessories.
6. 25-pin D-range connector in the right side of the sample compartment for accessories.

Using the Software

For information on how to use the software, please see the Cary 60 Tutorial and
the Cary WinUV Help installed on your computer during the Cary WinUV software
installation.
28
2
1
3
4
5
6
Agilent Cary 60 Spectrophotometer User's Guide
Introduction