Disassembly And Withdrawal From Use; Disassembly; Scrapping; Warranty Card - SaMASZ KDD 860 Operator's Manual

9. DISASSEMBLY AND WITHDRAWAL FROM USE

9.1. Disassembly

Before starting any repair or service the mower should be cleaned and any grass or dirt
removed. Carefully check nuts and bolts for correct tension and the pins for wear. Replace as
necessary.

9.2. Scrapping

If the mower cannot be repaired anymore, it should be withdrawn from use
For this purpose oil from intersecting axis gear and cutterbar should be drained and delivered
to a proper waste treatment company. Clean the mower parts, dismantle and dispose properly of all
plastic parts. After that, the mower could be sold to breaker's yard.
CAUTION:
Before disassembly the mower should be disconnected from the tractor.

10. WARRANTY CARD

REAR DOUBLE-SIDED MOWER WITH CENTRAL SUSPENSION
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
CAUTION:
A warranty card without the required information or with corrected or
illegible information – is invalid.
Operator's manual
- 38 -
Double-sided disc mowers
with central suspension
.
Serial number
Date of manufacture
Manufacturer's stamp
QC signature
Date of purchase
Dealer's stamp
Dealer's signature