4.10. Safety labels and their meaning
Safety labels are critical to safe use of this mower. They must be read, understood and followed.
Also, be sure that:
All warning decals are clean and legible,
All lost or damaged decals are replaced by ordering new decals from your dealer or supplier,
All persons using this mower have read the section of this manual explaining the meanings of
these labels,
All spare part used for repair of the mower should have all safety labels provided by the
manufacturer.
N-01
Be extremely careful when
PTO shaft is rotating
N-05
Warning: belt gear, keep
particular attention
N-11
N-23
Warning: power lines
Operator's manual
N-02
Warning: cutting knives! Do
not get near to the operating
mower
N-06
Warning: pulling-in parts
N-14
N-28
Trailed disc mowers
N-03
Prior to operation
commencement read the
operator's manual carefully
N-07
Operating the mower is
forbidden with presence of any
unauthorized personnel within
the danger area of 170 ft
- 18 -
KDC
N-04
Prior to approaching any
maintenance or repair works,
turn the machine off
N-09
Warning: rotor
N-15
N-29