Risks Present When Lubricating - SaMASZ KDC 260 Operator's Manual

Conditioner lubrication points:
Fig. 46.Non-locating bearing lubrication point
Fig. 48. Non-locating bearing lubrication point on conditioner and shafts to be lubricated with grease ŁT 43

7.5. Risks present when lubricating

If risk of splashing is present, make sure to wear protective eyewear with side guards.
When lubricating protect eyes and skin against contact with the substance. Therefore use
adequate protective wear with long sleeves and protective shoes. Also use protective gloves.
In case of a contact with skin, immediately wash the infected area with plenty of soap water.
Do not allow the product to contaminate water outlets, water courses and soils.
In case of an unintentional release to the environment plug the leak, limit the spillage, and
then collect the oil with non-flammable absorbent material (e.g. sand).
The product is flammable. In case of fire, use adequate fire-extinguishing means (e.g. foam,
water mist, extinguishing powders). Do not use water jets.
Disposal of the used product must be made according to official regulations. Improper
disposal of the used oil poses danger to the environment.
Operator's manual
Lubrication
point
Lubrication point
Trailed disc mowers
Lubrication
points
Fig. 47. Non-locating bearing lubrication point
- 43 -
KDC