Switching The Backlight On/Off - JDS Uniphase ORL-55 Series Operating Manual

The FACTORY DEFAULT menu opens:
2. Press [MENU ENTER] to set the factory defaults.
– or –
Press any key to exit from the menu without making
any changes.
Note: Setting the factory default values does not affect
your stored measurement results.

Switching the backlight on/off

'
 Press [
] to switch the backlight on/off.
Note: The backlight does not switch off automatically.
Showing device information
 Select Show Info in the CONFIGURATION menu.
The INFO menu opens and basic device information
is shown: device name, family, serial number,
calibration date, software version, battery type and, if
applicable, date and time.
Setting date and time
1. Select Edit date in the CONFIGURATION menu.
The EDIT DATE MENU opens:
2. Press [] to set year and press [MENU ENTER].
3. Press [] to set month and press [MENU ENTER].
4. Press [] to set day and press [MENU ENTER].
5. Select Edit time in the CONFIGURATION menu.
The EDIT TIME menu opens.
6. Press [] to set hours and press [MENU ENTER].
JDSU
4 B
ORL-55
F
ASIC UNCTIONS
23