JDS Uniphase ORL-55 Series Operating Manual page 23

The following table gives a short overview of the menu
items. These are explained in the sections below.
Edit -Table
Select Auto-
Edit Contrast
Set Factory
Default
Show Info
Edit Date
Edit Time
Firmware
Update
Select
Language
Wavelengths (Power Meter)
The wavelength table (-Table) supports the definition of
up to 30 wavelengths. The wavelengths with the attribute
"shown" form a set of wavelengths which will be rotated
through when the [] key is pressed.
The remaining wavelengths are "hidden".
E.g. if only two wavelengths have the attibute "shown",
you can toggle between them with a single stroke.
To edit the -table:
1. Press Edit -Table in the CONFIGURATION menu.
The EDIT -TABLE menu opens .
JDSU
4 B
Edit the wavelengths in the table
and the view status (show/hide) of
each entry.
Activate/deactivate the "Automatic
Wavelength Detection".
Adjust display contrast.
Set the device parameters and
settings to their default values as
defined by JDSU. This does not
affect any stored measurement
results.
Display basic device information.
Adjust date.
Adjust time.
Download the current device
firmware version from the internet
to the device.
Select the language of the device
texts.
ORL-55
F
ASIC UNCTIONS
19