JDS Uniphase ORL-55 Series Operating Manual page 24

4 B F
ASIC
2. Highlight the entry to be edited and press
[MENU ENTER].
A window opens:
3. Press [MENU ENTER] again to edit the selected
wavelength (Edit is already selected).
The value to be edited is displayed, the last cipher is
highlighted:
4. Press [] to change the value:
- Press once to change one step at a time.
- Hold down the key to increase the step change rate.
5. Press [MENU ENTER] to set the new wavelength.
The EDIT -TABLE window is displayed again.
6. To change the view status again press
[MENU ENTER].
7. Select Show to show the wavelength in the table
– or –
Select Hide to hide the wavelength in the table.
8. Press [MENU ENTER] to confirm the selection.
Repeat steps 2 through 7 as required.
20
UNCTIONS
ORL-55 JDSU