FULTON VSRT Series Installation And Operation Manual page 22

2 - INSTALLATION
7 1/8
24 1/8
Note 3: Fulton recommends a minimum clearance of 36" in front of the electrical panels.
Note 4: Fulton recommends 36" clearance between openings of all boilers, 18" clearance of handholes, and 18" from exhaust stack.
Note 11: Local codes supercede Fulton recommended clearances.
2-12
VSRT_IOM_2018-1213
P
F
Figure 9 - 30-HP Model VSRT Dimensions - Top
UNLESS OTHERWISE NOTED This design and drawings
The items shown in this
DIMENSIONS ARE IN INCHES
are proprietary and are the
TOLERANCES drawing may be covered by
 exclusive property of
FRACTION & 1/8
one or more patents of
WHOLE VALUE
Fulton Group N.A., Inc.
Fulton Group N.A., Inc.
(1) PLACE DEC.  0.03
The corporation does not
(2) PLACE DEC.  0.015
(3) PLACE DEC.  0.005
permit their use except

ANGLE 0.5 DEG
with prior written consent.
SURFACE FINISH
250 MICRO-INCHES
59 7/8
32 1/2 (MINIMUM WIDTH)
7 1/8
SEE
NOTE
4
SEE NOTES 3 AND 11
View (All dimensions in inches)
DRAWN BY:
T. KENNEDY
CHECKED BY:
J.B.
B.O.M. REVIEW
THIRD ANGLE PROJECTION
N/A
2 OF 2
E
C
62
MECH. ENG:
2/16/2017 W.W. 2/24/2017
ELEC. ENG:
2/24/2017 N/A
APPROVED BY:
E.B.W.
2/24/2017
JOB NUMBER:
PROJECT NAME:
© Fulton 2018
PROJECT MANAGER: