Huawei S Series Quick Configuration page 35

c. View the configuration results.
After configuring the interfaces and VLANs, run the following commands to view the
1
configuration results. For details about the command output, see the corresponding
Command Reference
Run the display vlan
[ACC1] display vlan
The total number of VLANs is : 2
--------------------------------------------------------------------------------
U: Up; D: Down;
MP: Vlan-mapping;
#: ProtocolTransparent-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
10 common UT: GE0/0/1(U)
20 common UT: GE0/0/2(U)
VID Status Property
--------------------------------------------------------------------------------
10 enable default
20 enable default
2 Run the display vlan
configurations on CORE1.
[CORE] display vlan
The total number of VLANs is : 7
--------------------------------------------------------------------------------
U: Up; D: Down;
MP: Vlan-mapping;
#: ProtocolTransparent-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
10 common TG:GE0/0/1(U)
20 common TG:GE0/0/1(U)
30 common TG:GE0/0/2(U)
40 common TG:GE0/0/3(U)
50 common TG:GE0/0/4(U)
100 common TG:GE0/0/7(U)
300 common UT:GE0/0/5(U)
VID Status Property
--------------------------------------------------------------------------------
10 enable default
20 enable default
30 enable default
40 enable default
50 enable default
100 enable default
300 enable default
based on the version of the device.
command to view VLAN configurations on ACC1.
TG: Tagged;
ST: Vlan-stacking;
*: Management-vlan;
TG:GE0/0/3(U)
TG:GE0/0/3(U)
MAC-LRN Statistics Description
enable disable
enable disable
command to view VLAN
TG: Tagged;
ST: Vlan-stacking;
*: Management-vlan;
MAC-LRN Statistics Description
enable disable
enable disable
enable disable
enable disable
enable disable
enable disable
enable disable
32
ACC1's upstream and
downstream interfaces have
been added to VLANs 10 and
UT: Untagged; 20. The upstream interfaces
transparently transmit all
service VLANs.
GE0/0/4(U)
GE0/0/4(U)
VLAN 0010
VLAN 0020
On CORE1, interfaces
connecting to access switches
have been added to
corresponding service VLANs.
UT: Untagged;
VLAN 0010
VLAN 0020
VLAN 0030
VLAN 0040
VLAN 0050
VLAN 0100
VLAN 0300