Huawei S Series Quick Configuration page 69

Configuring WLAN Service Parameters
1
Create security profile wlan-security and set a security policy in the profile.
In this example, the security policy is set to WPA2+PSK+AES and
password to a1234567. In practice, configure a security policy based on
service requirements.
[AC-wlan-view] security-profile name wlan-security
[AC-wlan-sec-prof-wlan-security] security wpa2 psk pass-phrase a1234567 aes
[AC-wlan-sec-prof-wlan-security] quit
Create SSID profile wlan-ssid and set the SSID name to wlan-net.
2
[AC-wlan-view] ssid-profile name wlan-ssid
[AC-wlan-ssid-prof-wlan-ssid] ssid wlan-net
[AC-wlan-ssid-prof-wlan-ssid] quit
Create VAP profile wlan-vap, set the data forwarding mode and service VLAN, and
3
apply the security profile and SSID profile to this VAP profile.
[AC-wlan-view] vap-profile name wlan-vap
[AC-wlan-vap-prof-wlan-vap] forward-mode tunnel
[AC-wlan-vap-prof-wlan-vap] service-vlan vlan-pool sta-pool
[AC-wlan-vap-prof-wlan-vap] security-profile wlan-security
[AC-wlan-vap-prof-wlan-vap] ssid-profile wlan-ssid
[AC-wlan-vap-prof-wlan-vap] quit
Bind VAP profile wlan-vap to the AP group, and apply the profile to radio 0 and radio 1
4
of the AP.
[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] vap-profile wlan-vap wlan 1 radio all
[AC-wlan-ap-group-ap-group1] quit
66