Huawei S Series Quick Configuration page 68

[AC] wlan
[AC-wlan-view] ap auth-mode mac-auth
[AC-wlan-view] ap-id 0 ap-mac 60de-4476-e360
[AC-wlan-ap-0] ap-name area_1
Warning: This operation may cause AP reset. Continue? [Y/N]:y
[AC-wlan-ap-0] ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it
will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y
[AC-wlan-ap-0] quit
[AC-wlan-view] ap-id 1 ap-mac 60de-4474-9640
[AC-wlan-ap-1] ap-name area_2
Warning: This operation may cause AP reset. Continue? [Y/N]:y
[AC-wlan-ap-1] ap-group ap-group1
Warning: This operation may cause AP reset. If the country code changes, it
will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y
[AC-wlan-ap-1] quit
After the APs are powered on, run the display ap all command to check the AP states.
5
If the value of the State field displays nor, the APs have gone online successfully.
[AC-wlan-view] display ap all
Total AP information:
nor : normal
Extra information:
P : insufficient power supply
------------------------------------------------------------------------------------
ID MAC
------------------------------------------------------------------------------------
0 60de-4476-e360 area_1 ap-group1 10.23.100.254 AP5030DN
1 60de-4474-9640 area_2 ap-group1 10.23.100.253 AP5030DN
------------------------------------------------------------------------------------
Total: 2
[2]
Name Group IP Type
65
State STA Uptime ExtraInfo
nor 0 5M:2S
nor 0 5M:4S
-
-