Huawei S Series Quick Configuration page 71

Campus switches
Hide thumbs Also See for S Series:
Table of Contents

Advertisement

Verifying the Configuration
After the configuration is complete, run the display vap ssid wlan-net command. If the
1
value of the Status field in the command output is displayed as ON, the VAPs have
been successfully created on the AP radios.
[AC-wlan-view] display vap ssid wlan-net
WID : WLAN ID
---------------------------------------------------------------------------
AP ID AP name RfID WID
---------------------------------------------------------------------------
0
area_1
0
0
area_1
1
1
area_2
0
1
area_2
1
---------------------------------------------------------------------------
Total: 4
Connect STAs to the WLAN with SSID wlan-net and enter password a1234567. Run
2
the display station ssid wlan-net command on the AC. The command output shows
that the STAs are connected to the WLAN wlan-net.
[AC-wlan-view] display station ssid wlan-net
Rf/WLAN: Radio ID/WLAN ID
Rx/Tx: link receive rate/link transmit rate(Mbps)
------------------------------------------------------------------------------
STA MAC
AP ID Ap name
------------------------------------------------------------------------------
e019-1dc7-1e08
0
14cf-9202-13dc
1
------------------------------------------------------------------------------
Total: 2 2.4G: 1 5G: 1
[AC-wlan-view] quit
[AC] quit
Saving the Configuration
The data configured using the preceding commands are temporary. If you do not save
1
the configuration, the configuration will be lost after the AC restarts.
To enable the current configuration to take effect after the AC restarts, save the current
configurations into a configuration file.
Take the configuration on the AC as an example.
<AC> save
The current configuration will be written to flash:/vrpcfg.zip.
Are you sure to continue?[Y/N]y
Now saving the current configuration to the slot 0..
Save the configuration successfully.
BSSID
1
60DE-4476-E360 ON
1
60DE-4476-E370 ON
1
60DE-4474-9640 ON
1
60DE-4474-9650 ON
Rf/WLAN Band Type Rx/Tx RSSI VLAN IP address
area_1
1/1
area_2
0/1
Status
Auth type
WPA2-PSK
WPA2-PSK
WPA2-PSK
WPA2-PSK
5G
11n
38/64 -68
2.4G 11n
3/34
68
STA
SSID
0
wlan-net
0
wlan-net
0
wlan-net
0
wlan-net
102
10.23.102.254
-68
101
10.23.101.254

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S2750S5700

Table of Contents