Huawei S Series Quick Configuration page 65

Configuring the AC to Assign IP Addresses to APs and
Router to Assign IP Addresses to STAs
Configure the AC as a DHCP server to assign IP addresses to APs from an interface
IP address pool, the AC as a DHCP relay agent, and Router connected to the AC to
assign IP addresses to STAs.
1
Configure the AC to assign IP addresses to APs from an interface address pool.
[AC] dhcp enable
[AC] interface vlanif 100
[AC-Vlanif100] ip address 10.23.100.1 24
[AC-Vlanif100] dhcp select interface
[AC-Vlanif100] quit
2 Configure the AC as a DHCP relay agent.
[AC] interface vlanif 101
[AC-Vlanif101] dhcp select relay
[AC-Vlanif101] dhcp relay server-ip 10.23.200.1
[AC-Vlanif101] quit
[AC] interface vlanif 102
[AC-Vlanif102] dhcp select relay
[AC-Vlanif102] dhcp relay server-ip 10.23.200.1
[AC-Vlanif102] quit
3
Configure Router as a DHCP server to assign IP addresses to STAs.
<Huawei> system-view
[Huawei] sysname Router
[Router] dhcp enable
[Router] ip pool sta-ip-pool1
[Router-ip-pool-sta-ip-pool1] gateway-list 10.23.101.1
[Router-ip-pool-sta-ip-pool1] network 10.23.101.0 mask 24
[Router-ip-pool-sta-ip-pool1] quit
[Router] ip pool sta-ip-pool2
[Router-ip-pool-sta-ip-pool2] gateway-list 10.23.102.1
[Router-ip-pool-sta-ip-pool2] network 10.23.102.0 mask 24
[Router-ip-pool-sta-ip-pool2] quit
[Router] vlan batch 200
[Router] interface vlanif 200
[Router-Vlanif200] ip address 10.23.200.1 24
[Router-Vlanif200] dhcp select global
[Router-Vlanif200] quit
[Router] interface gigabitethernet 2/0/0
[Router-GigabitEthernet2/0/0] port link-type trunk
[Router-GigabitEthernet2/0/0] port trunk allow-pass vlan 200
[Router-GigabitEthernet2/0/0] quit
[Router] ip route-static 10.23.101.0 24 10.23.200.2
[Router] ip route-static 10.23.102.0 24 10.23.200.2
62