Quickly Configuring Small- And Mid-Sized Campus Networks - Huawei S Series Quick Configuration

Quickly Configuring Small- and Mid-Sized
3.2
Campus Networks
Follow the procedure shown below to configure the switches and router. Once
configurations are complete, user devices within the campus can communicate with each
other, and intranet users can access the Internet.
Step 1 – Log in to
the switch.
Step 2 – Configure
the management IP
address and Telnet.
Step 3 – Configure
network connectivity.
Step 4 – Configure
DHCP.
Step 5 – Configure
OSPF.
Step 10 – Verify
services and save
configuration.
Step 9 – Configure
NAT server and
multiple egress
interfaces.
Step 8 – Configure
rate limiting.
Step 7 – Configure
link aggregation.
Step 6 – Configure
reliability and load
balancing.
26