Huawei S Series Quick Configuration page 64

Configuring the AC to Communicate with the
Upstream Network Device
1
Configure VLAN 101 (service VLAN), VLAN 102 (service VLAN), and VLANIF 200.
Configure uplink interfaces of the AC to transparently transmit
packets of service VLANs as required and communicate with the
upstream network device.
[AC] vlan batch 101 102 200
[AC] interface vlanif 101
[AC-Vlanif101] ip address 10.23.101.1 24
[AC-Vlanif101] quit
[AC] interface vlanif 102
[AC-Vlanif102] ip address 10.23.102.1 24
[AC-Vlanif102] quit
[AC] interface vlanif 200
[AC-Vlanif200] ip address 10.23.200.2 24
[AC-Vlanif200] quit
2
Configure the default route on the AC.
[AC] ip route-static 0.0.0.0 0.0.0.0 10.23.200.1
3
Add GE0/0/2 connecting the AC to Router to VLAN 200.
[AC] interface gigabitethernet 0/0/2
[AC-GigabitEthernet0/0/2] port link-type trunk
[AC-GigabitEthernet0/0/2] port trunk allow-pass vlan 200
[AC-GigabitEthernet0/0/2] quit
61