Huawei S Series Quick Configuration page 33

Configuring Network Connectivity
a. Configure the access switch.
Starting with access switch ACC1 as an example, create service VLANs 10 and 20 on
1
ACC1.
<HUAWEI> system-view
[HUAWEI] sysname ACC1
[ACC1] vlan batch 10 20
Configure GE0/0/3 and GE0/0/4, through which ACC1 connects to CORE1 and CORE2
2
respectively, to allow the packets from the VLANs of departments A and B to pass through.
[ACC1] interface GigabitEthernet 0/0/3
[ACC1-GigabitEthernet0/0/3] port link-type trunk
Trunk for VLAN transparent transmission.
[ACC1-GigabitEthernet0/0/3] port trunk allow-pass vlan 10 20
GE0/0/3 to transparently transmit the service VLANs on ACC1.
[ACC1-GigabitEthernet0/0/3] quit
[ACC1] interface GigabitEthernet 0/0/4
[ACC1-GigabitEthernet0/0/4] port link-type trunk
Trunk for VLAN transparent transmission.
[ACC1-GigabitEthernet0/0/4] port trunk allow-pass vlan 10 20
GE0/0/4 to transparently transmit the service VLANs on ACC1.
[ACC1-GigabitEthernet0/0/4] quit
Configure the interfaces on ACC1 that connect user devices so that user devices in
3
different departments can be added to VLANs.
[ACC1] interface GigabitEthernet 0/0/1
connecting to department A.
[ACC1-GigabitEthernet0/0/1] port link-type access
[ACC1-GigabitEthernet0/0/1] port default vlan 10
[ACC1-GigabitEthernet0/0/1] quit
[ACC1] interface GigabitEthernet 0/0/2
connecting to department B.
[ACC1-GigabitEthernet0/0/2] port link-type access
[ACC1-GigabitEthernet0/0/2] port default vlan 20
[ACC1-GigabitEthernet0/0/2] quit
4
Configure the BPDU protection function to improve network stability.
[ACC1] stp bpdu-protection
To add all users connected to ACC1 to VLAN 10, you can add interfaces
on CORE1 and CORE2 that directly connect to ACC1 as Access
interfaces and do not add interfaces on ACC1 to VLAN 10, simplifying
the configuration. This configuration ensures that all users connected to
Eth-Trunk1 belong to VLAN 10.
//Set the switch name to ACC1.
//Create VLANs in a batch.
30
//Set GE0/0/3 type to
//Set GE0/0/4 type to
//Configure the interface
//Configure the interface
//Configure
//Configure