Huawei S Series Quick Configuration page 16

Run the display eth-trunk
[CORE] display eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1
Preempt Delay: Disabled
System Priority: 32768
Least Active-linknumber: 1
Operate status: up
--------------------------------------------------------------------------------
ActorPortName
GigabitEthernet0/0/1
GigabitEthernet0/0/2
Partner:
--------------------------------------------------------------------------------
ActorPortName
GigabitEthernet0/0/1
GigabitEthernet0/0/2
CORE's GE0/0/1 and GE0/0/2
interfaces have been added to
Eth-Trunk 1.
Run the display vlan
configurations on CORE.
[CORE] display vlan
The total number of VLANs is : 3
--------------------------------------------------------------------------------
U: Up; D: Down;
MP: Vlan-mapping;
#: ProtocolTransparent-vlan;
--------------------------------------------------------------------------------
VID Type Ports
--------------------------------------------------------------------------------
10 common TG:Eth-Trunk1(U)
20 common TG:Eth-Trunk2(U)
100 common TG:GE0/0/20(U)
VID Status Property
--------------------------------------------------------------------------------
10 enable default
20 enable default
100 enable default
command to view Eth-Trunk configurations on CORE.
WorkingMode: LACP
Hash arithmetic: According to SA-XOR-DA
System ID: 0200-0000-6703
Max Active-linknumber: 8
Number Of Up Port In Trunk: 1
Status PortType PortPri PortNo PortKey PortState Weight
Selected 100M
Selected 100M
SysPri SystemID
32768 0012-3321-2211
32768 0012-3321-2211
command to view VLAN
TG: Tagged;
ST: Vlan-stacking;
*: Management-vlan;
MAC-LRN Statistics Description
enable disable
enable disable
enable disable
32768 2 289
32768 3 289
PortPri PortNo PortKey PortState
32768 2
32768 3
On CORE, Eth-Trunk 1 has
been added to VLAN 10, Eth-
Trunk 2 has been added to
VLAN 20, and GE0/0/20 has
been added to VLAN 100 in
Tagged mode.
UT: Untagged;
VLAN 0010
VLAN 0020
VLAN 0100
13
10111100 1
10100010 1
289 10111100
289 10111100