General Safety Requirements - Owon VDS Series Quick Manual

1. General Safety Requirements

Before any operations, please read the following safety precautions to avoid
any possible bodily injury and prevent this product or any other products
connected from damage. In order to avoid any contingent danger, this
product is only used within the range specified.
Only the qualified technicians can implement the maintenance.
Pay attention to the nominal values of all terminals: To avoid fire or electric shock, please
keep a watchful eye on all nominal values and marks specified for this product. Before any
connection performed on this product, carefully read the user's manual of the product for
further information of nominal values.
No touch is allowed on bare conductors: When the product is powered on, do not touch any
bare joints or parts of the scope meter.
Operation is prohibited in case of any undetermined failure: When in doubt any damage
on this product, consult the qualified personnel for checking on it.
Keep ventilation in good condition: Refer to the user manual for detail installation
instructions in order to fix this product correctly and provide it with good ventilation conditions.
No operation is allowed under a humid environment.
No operation is allowed under an explosive environment.
Keep clean and dry on the product surface.
The method which stipulated according to the factory does not use the equipment,
possibly can damage the protection which the equipment provides.
1